The Original 05-07 Ford SuperDuty 20" LED Light Bar Bumper Brackets
If your 05-07 Ford Superduty F250 or F350 Truck did not come with factory foglights, or if you would like to replace your factory foglights....our bracket kit will put either a single dual row 20" LED light bar, or a pair of single row 20" LED light bars in the bumper opening using the existing holes in the bumper. A great way to get plenty of light with a low profile design. Laser cut from 1/8" steel, CNC bent for precision, and powder coated satin black for great looks. We designed these to be an easy, bolt-on installation. Keep in mind that this will replace your factory foglights.
- Left and right brackets
- Hardware bag with new bolts and clips
Click to download the PDF instructions:
!!! ---- Please note that these brackets are designed to fit with LED light bars that use an end-style L bracket mounting. NOT the kind of light bars that use a sliding bracket on the back of the light. ---- !!!
These brackets fit bars with dimensions of 21.375" to 21.625". A typical 20" bar is measured by the lens, and the overall width is about 21.5" end to end.
Replacing the factory foglights? Add on an adapter harness! One end plugs directly into your factory foglight plug, the other end has a square Deutsche style connector which is commonly used by light bar manufacturer's. If your light bar does NOT have a plug on the end, and only has bare wires, you can use our TR-9005 wiring pigtail instead. NEW Rigid PRO series 20" light bars do not come with a Deutsche connector. You must have the factory foglight circuit installed on your truck. The factory foglight wiring has a 10amp fuse in the panel, so if you plan to run 2 single row bars off the circuit you need to make sure the bars combined pull below the 10 amp fuse rating, otherwise you may want to run just one off of the fog light wiring, and the other off a separate switch.